Author: Gale

  • An overdue thank you to Haakon

    I realized I have been negligent in making a thank you here to a new friend who has been helping me with a project.

    When Jean-Francois purchased his R1200GSA last June there were all these neat documents available for the care of that motorcycle. One in particular caught my interest because it seemed like such a good idea.

    How cool is that? All the electrical parts identified with where they are located on the motorcycle. Okay — there are some

    This is what BMW produced for the F650GS

    Anybody other than me notice a slight difference between the two documents?

    When my motorcycle stopped running in Brownwood, TX on the way to Big Bend National Park in March I called the dealer asking for help in diagnosing what had happened. I was told to call roadside assistance and have it towed to the nearest dealer. This is not an acceptable solution for me.

    When I returned home I posted on the Chain Gang Forum on F650.com asking for steps in diagnosing why a motorcycle would stop running. How to determine if it was spark, fuel, or air and then trace it to the source of the failure.

    Haakon (his post name — I don’t know if it’s his real name) responded to that post more than one time all the way from Norway. I contacted him directly and asked how he’d feel about helping me add labels to the above image and he’s been working with me since on that project that has now expanded to other things like referencing the pages in the repair manual . This is what Haakon and I have come up with so far (it’s a work in progress we plan to complete when I get back from the ride to California).

    I ask again — how cool is that?

    My plan is to print both the left and ride side images with labels and carry with me on the motorcycle. I always carry my laptop with the repair manual (I’ll also have backups of these images), so hopefully the combination of the two will help me solve problems that come up. We also plan to share it with the members of the F650 forum.

    Bottom line — Thank you Haakon for being so willing, so helpful, and so fun with this project. I wouldn’t have gotten much of anywhere on it without your help.

  • Delayed departure and lesson learned

    After almost 4 weeks I was able to get my motorcycle back yesterday from the dealer doing extended warranty repairs to the water pump and radiator fan.  I thought though the warranty was supposed to be extended. I wish someone would have told me that means the repairs will be extended. That is an entire saga in itself that will be covered in another post once I cool off.

    Printing on board reads "BMW Approved"

    I rode the motorcycle straight from the dealer to Brad Miller’s to get a new Ohlin shock put on before leaving on the trip. Brad is an incredibly nice guy who is so knowledgeable about motorcycles and so happy to share that knowledge that it was a really enjoyable afternoon.I asked lots of questions and which Brad cheerfully answered.

    It was much more difficult to access the shock than either of us initially thought. After looking at it and wondering if the under the seat fuel tank had to come out (and I have no idea how one would do this) Brad decided pulling the muffler, loosening the sub-frame bolts and lifting the entire tail section might be the path of least resistance. This required removing the mounts for my Jesse cases and side plastic pieces before the muffler could be pulled off. Then the tail lifted right up.

    Brad kind of laughed at me since I was clearly not comfortable with dismantling the motorcycle right before a trip, but he said we would make sure everything was tightened properly and the motorcycle might very well be in better shape after than it was before. I believe he was right since none of these bolts had been checked in a while.

    Brad discovered one odd and disconcerting thing when he got down to the OEM shock. The bolt that holds the shock to the mount had no nut put on it (see picture below). I checked the BMW microfiche and they don’t show a nut for the strut bolt, but I realize that doesn’t mean a whole lot since the fiche aren’t all that accurate. Brad and I went to Ace Hardware and found a 10mm nut and washer and both are now on the motorcycle securing that bolt.

    Brad got the shock installed and the motorcycle back together in no time. There was just one teeny little problem. The first sign of this was when Brad realized that both wheels were now firmly on the concrete when the motorcycle was on the center stand. He took it off the center stand and the angle of the motorcycle on the side stand was frightening. I explained to Brad that when I’m fully loaded for a trip I have to be careful where I park because if the side stand is slightly downhill I can’t get the motorcycle off the side stand. Jean-Francois has had to give me a boost on more than one occasion so I guess I don’t have a whole lot of leverage since I’m short enough that my feet are barely flat on the ground. When I got on the motorcycle I could barely get my toes on the ground. I believe the shock is the standard GS shock. Ohlin doesn’t make a shock specifically for the GSL (lowered).

    No way tippy toe is a good idea when I’m traveling by myself. Brad is leaving for California this morning and going to be back  late Saturday so he’s ordering shorter springs from Ohlin, having them delivered tomorrow (Saturday). and I’m going to be at his house at 8:00AM Sunday to pull the shock and change the spring.

    It’s always disappointing to delay a departure, but I think I made the right decision. This will give me time to go over the motorcycle and do some maintenance that I have been unable to do since it was at the dealer for so long. So, all in all, not a bad thing at all.

    I’m looking forward to going back over to Brad’s since it will be an opportunity for me to learn more. Hopefully I will get back home, pack the motorcycle, and be on the road Monday morning.

    The lesson learned? Don’t make any major changes to a motorcycle immediately before leaving on a trip. Get the modifications and maintenance done early and ride the motorcycle for a while to make sure it’s all in good order. Next time…

    Bolt with no nut on it
    Old and new shock
    Installed Ohlin
  • RSS Feed and Email Subscription

    For anyone who may be interested in being annoyed, oh I’m sorry — I meant updated, whenever I add a new post, I have added an RSS feed and email subscription through Feedburner. You can see it over in the right hand column.

    Don’t worry — both are reversible, so you aren’t stuck with it forever.

    I’ll be updating during the trip when I have internet access. If weather allows on the way out to California I will be camping for the first several days, so I may not be able to post anything until I get to Tenaya Lodge in Yosemite.

    Of course, this all hinges on whether I have a motorcycle. Sigh… And yes, I will be calling today to see if the parts came in.

  • Itinerary for TOY Ride

    My wish list…

    Day 1 – Visit Capulin Volcano National Monument and stop for the night at Sugarite Canyon State Park outside Raton, NM

    Day 2 – Mesa Verde National Park near Cortez, CO

    Highway of Legends out of Trinidad http://www.motorcycleroads.us/roads/co12.html “The Scenic Highway of Legends is a national scenic by-way. Beautiful, and relatively un-discovered part of Colorado. Start in Walsenburg at I-25 and Hwy 160. Modern hotels, the Mining Museum, Art Museum. You’re in Spanish Peaks Country. The Peaks dominate the landscape, and the Culebra Range of the Rockies frame the western view. Take Hwy 12 to La Veta…art museums, Francisco Fort, quaint and friendly town. Head south on Hwy 12, through the village of Cuchara, have to stop at the Dog Bar, head south on 12 over Cuchara Pass into Las Animas County, follow Hwy 12 into Trinidad for great food, shopping, modern hotels. Hwy 12 is designated as a Scenic Byway. The route from Walsenburg to Trinidad is about 80 miles, plan on a day as you’ll be whipping your camera out every 10 minutes!!! Enjoy the ride, it’s one of the most scenic rides and convenient to the Front Range.”

    US 160 through Colorado http://www.motorcycleroads.us/roads/co_us160.html “I rode this in July starting just east of Durango. Going over the Wolf Creek Pass is breathtaking. Going up the west side, it’s mostly 4 lane, so it’s easy to pass. Going down the east side was mostly 2 lane after you got about halfway down, but it wasn’t a problem as people were going fast enough. Pagosa Springs is a great place to spend the night and spend some time soaking in the hot springs. Then everyone can wonder why you smell like sulpher the next day.”

    Day 3 – full day touring the cliff dwellings at Mesa Verde National Park

    Day 4 – Ride through Glen Canyon National Recreation Area and Zion National Park (both in Utah) and stay at Great Basin National Park in Nevada

    Leaving Mesa Verde from http://www.motorcycleroads.us/roads/co_us160sw.html “Excellent 2 lane paved highway through barren and lonely high desert area. Very little traffic. Route is through the Navajo Nation Indian Reservation. The highway passes the Four Corners Monument and Navajo Tribal Park. The only geographical location in the USA where four states intersect. New Mexico, Utah, Arizona, Colorado. The monument is on Navajo Tribal Park land and costs $3.00 to enter. Booths are set up around the monument and sell Indian handicrafts. Good riding highway for all skill levels with curves, twists, long sweeps and elevation changes. Fascinating scenery. Full amenities in Kayenta. Gas and snacks available at Red Mesa and Mexican Water.”

    Road through Zion http://www.motorcycleroads.us/roads/ut9.html “I highly recommend this scenic drive to anyone interested in a leisurely ride through unique scenery. Don’t plan to travel quickly along this road, though. Even if the traffic is flowing, the speed limit is slow (through the towns and especially Zion Nat’l Park). Once in Zion you’ll want to go slow to enjoy the unique scenery and wildlife, and take the occasional short hike; spotting wild rams and other animals is not unusual. You could spend days enjoying the park if you can stay there, but it’s winding roads with steep sides, lots of tourist traffic, and eager park rangers with ticket-books make this a leisurely ride, not a canyon knee-dragger. I make a habit of hitting this road twice a year: once in early spring and once in late fall. Traffic though Zion requires a fee of $25 (2008 prices) or an annual pass, even if you don’t stop along the way. It’s worth it!”

    Day 5 – Overland Hotel & Saloon in Fallon, NV on Highway 50 “The Loneliest Road in America” (had to change route when I found out the road I planned to take to Yosemite is still closed for the winter)

    http://www.motorcycleroads.us/roads/nv_us50.html “US 50, the ‘Loneliest Road in America’, is a great ride. We started in Delta, UT @7:30 MDT 6/16/06 and stopped for coffee and a snack at the Border Inn near Baker NV. Nice folks, nice place, food looked good. Passed through Ely, a unique western town as our route paralleled the Pony Express in spots. There is an old way station along the route which is in the process of being restored. Mountain passes and huge flat stretches with marvelous vistas the entire way. Stopped for lunch in Eureka at the Owl Casino/Cafe. Very good. Cruised through Austin, another unique western town (actually they all are on this stretch), and stopped at Cold Spring for a beer. Great little place, a true oasis in the desert. Cruised in to Fallon and stayed for the night before visiting Virginia City and Reno. We stayed at the Stockman Hotel and Casino, very nice acommodations and we had a terrific steak dinner at the casino restaurant.”

    Day 6 – Tenaya Lodge in Yosemite National Park for the Treasures of Yosemite Rally

    Taking US 88 because 4 and 108 are closed for winter. http://www.motorcycleroads.us/roads/ca88.html “I rode this road from Plymouth to junction with 89. I loved this ride, the scenery was great, with plenty of elevation changes and twists. There is a few blind corners that had a wild turkey or a deer around them, but as long as you’re awake you will be just fine. I didn’t have to much trouble with other traffic, but I was out in the morning on a Saturday. Had a lot of fun and am ready to go again.”

    From 88 to Yosemite http://www.motorcycleroads.us/roads/ca49.html “CA 49 is one of my favorite local routes. It stretches from Loyalton all the way south to Oakhurst, near Yosemite. From tip to tip, it’s one of the most beautiful and relaxing rides there is. There are spots of annoying congestion (Auburn and Placerville are the two biggest offenders) as it winds through many towns (mostly very small), but it doesn’t take long to get back to the beauty of the natural area. As the ’49’ suggests, this highway visits many of the old Gold Rush towns, each with their own personality. You get a little bit of everything from a ride perspective on this route (twisties, sweepers, flat open ground) and there are very few sections of this highway that don’t offer at least pleasant scenery. 49 ties in with almost all of the passes that take you over the Sierras (towards 395) and they are all pretty special as well. There is ample opportunity for fuel, food and rest stops along 49. I travel portions of this route every year (I’ve done every mile of it on differnt trips) and look forward to it every time. The route could be done tip to tip all in one day if so desired without trying too hard.”

    Route 41 to Tenaya http://www.motorcycleroads.us/roads/ca41.html “Very scenic and great sweepers!”

    Day 7 – Yosemite National Park

    Day 8 – Yosemite National Park

    Day 9 – Visit Kings Canyon National Park and Sequoia National Park and stay at undetermined stop

    Day 10 – Visit Death Valley National Park and stay at Grand Canyon Hotel (hostel rooms) in Williams, AZ

    Route 190 through Death Valley http://www.motorcycleroads.us/roads/ca190.html “Gorgeous, vast nothingness. This is a beautiful route across one of the most infamous areas of California. We went through it on the way back from Vegas to the Coast in late October. It was in the 40’s in Las Vegas, 90’s at the floor of Death Valley. Unlimited visibility. Keep in mind that it is a National Park and there are Park Rangers that patrol with radar. Generally, you can see their green and white SUV’s at quite a distance. The road is super smooth with awesome sweepers. It was an incredible experience that I will not soon forget.”

    Historic Route 66 http://www.motorcycleroads.us/roads/az66.html “Road is in fair shape with patchwork and an occasional pothole here and there. Very scenic with mountains to the north and the cool northern Arizona air. Area is great if there is a storm on the horizon. Seligman has a place to gas up and get a snack before heading on to Kingman, also one can get on Route 66 from I-40 here.”

    Day 11 – Visit Grand Canyon National Park and stop at Route 66 Hostel in Albuquerque, NV

    After Grand Canyon http://www.motorcycleroads.us/roads/az_us89.html  “Remarkably scenic route if you like the unlimited variations of volcanic rock formations in all colors. Straight and ‘boring’ ride in motorcylist’s terms, which allows you alot of time to enjoy the scenery. Gas at every opportunity – civilization (besides the occasional ‘Indian Blanket’ stand) is non existent from about 50 miles north of Flagstaff all the way to Page. Obviously a bit hot in the summer (carry plenty of water), but a must travel road.”

    Day 12 – It’s over 650 miles to get home from here so I’m not sure if I’ll want to do it in one day or stop somewhere along the way.

  • Still no motorcycle

    With departure less than two weeks away I would typically be wrapping up my pre-trip maintenance. Unfortunately it’s a taking a long time to get the warranty repairs completed.

    The good news is that my extended warranty will completely cover the broken radiator fan and also replacing the water pump seals. The bad news is they just ordered the parts yesterday and the motorcycle won’t be ready until next Wednesday. That gives me Thursday and Friday to change the fork oil, change the brake fluid, put new brake pads in and get the new Ohlin shock put on.

    Brad Miller, the local guy who does the Ohlin shocks, it being really cool about it and leaving Thursday open so I can ride over and hang out while he gets the shock installed.

    A friend is on standby and going to take me to the dealership as soon as the motorcycle is ready and then come back to my house to help with the maintenance. Some things take a little more strength and a few more hands than I possess so he’ll be available for that.

    In the meantime, I’ve gone through the camping gear to check everything, got it organized, and packed. I have been going through my camping food and I will have the organized and ready to go on the bike before the motorcycle is done. The other big thing is to get my clothing figured out and ready to go.  I hope to have everything ready to simply stick in or on the the motorcycle the end of next week.

    While it wouldn’t  make me happy, if it becomes necessary I can always drop off some stops and shorten the ride out there. I am very excited about Mesa Verde National Park and Great Basin National Park so I hope I get to see both.